1. In-situ rust removal of the reinforced steel bar: the steel rust remover (the raw liquid used, can not be watered) is sprayed into the sprayer and sprayed directly on the surface of the steel bar to prevail the rust stain of the steel. The surface is dried for 2-4 hours, and dried for 24 hours. After drying, the original color of the steel bar is exposed. Effective rust prevention for 3-6 months, the protection of steel bars no longer appears floating rust and rust, eliminate the damage of steel corrosion, save the cost of rust and reinforcement, short construction period and low cost, safe, environmentally friendly and fast. (Note: When the surface of the steel bar is lightly rusted, spray the original liquid directly; when the surface of the steel bar is heavy rust or slag, it should be beaten or shaken before spraying the steel rust remover).
2. A large number of rebar immersion and rust removal: the steel rust remover can be diluted by 2 to 3 (preferably used as the original liquid), then the steel and shelf tubes should be immersed in the steel rust remover, and the rust is cleaned and removed. Dry it.
3, severe rust tied steel bar rust: steel pre-rust removal (knock or vibration) -> spray steel rust remover -> high pressure water gun flush. Note that it is best to flush the high-pressure water gun before spraying the steel bar rust remover, and then spray the steel bar rust remover.
